top of page

My Site 1 Gruppe

Öffentlich·1 Mitglied

K7 Total Security Serial Number And Vendor Id ##HOT##

Scenario 1: If you have lost the activated key and want to re-activate K7 product again, you need to visit My Account and login with registered Email ID and Password. After successful login, you can see the serial number on the top border.Note: You can also find the serial key by navigating to Support from installed K7 Application.Scenario 2: If you have purchased a new box then you can find the 21 digit serial key printed over manual instruction paper inside the box along with CD.Note: If you have not registered the serial key yet or facing any difficulties in K7 account, you can send us the scan copy of box number and K7 purchase bill to or if you have purchased from our official website( kindly forward the purchase confirmation email to

k7 total security serial number and vendor id

This returns the processor's serial number. The processor serial number was introduced on Intel Pentium III, but due to privacy concerns, this feature is no longer implemented on later models (the PSN feature bit is always cleared). Transmeta's Efficeon and Crusoe processors also provide this feature. AMD CPUs however, do not implement this feature in any CPU models.

For Intel Pentium III CPUs, the serial number is returned in the EDX:ECX registers. For Transmeta Efficeon CPUs, it is returned in the EBX:EAX registers. And for Transmeta Crusoe CPUs, it is returned in the EBX register only.

As an example, a dual-core Westmere processor capable of hyperthreading (thus having two cores and four threads in total) could have x2APIC ids 0, 1, 4 and 5 for its four logical processors. Leaf Bh (=EAX), subleaf 0 (=ECX) of CPUID could for instance return 100h in ECX, meaning that level 0 describes the SMT (hyperthreading) layer, and return 2 in EBX because there are two logical processors (SMT units) per physical core. The value returned in EAX for this 0-subleaf should be 1 in this case, because shifting the aforementioned x2APIC ids to the right by one bit gives a unique core number (at the next level of the level id hierarchy) and erases the SMT id bit inside each core. A simpler way to interpret this information is that the last bit (bit number 0) of the x2APIC id identifies the SMT/hyperthreading unit inside each core in our example. Advancing to subleaf 1 (by making another call to CPUID with EAX=Bh and ECX=1) could for instance return 201h in ECX, meaning that this is a core-type level, and 4 in EBX because there are 4 logical processors in the package; EAX returned could be any value greater than 3, because it so happens that bit number 2 is used to identify the core in the x2APIC id. Note that bit number 1 of the x2APIC id is not used in this example. However EAX returned at this level could well be 4 (and it happens to be so on a Clarkdale Core i3 5x0) because that also gives a unique id at the package level (=0 obviously) when shifting the x2APIC id by 4 bits. Finally, you may wonder what the EAX=4 leaf can tell us that we didn't find out already. In EAX[31:26] it returns the APIC mask bits reserved for a package; that would be 111b in our example because bits 0 to 2 are used for identifying logical processors inside this package, but bit 1 is also reserved although not used as part of the logical processor identification scheme. In other words, APIC ids 0 to 7 are reserved for the package, even though half of these values don't map to a logical processor.

Occasionally, you might need to remotely read serial numbers from your MDS 9000 series multilayer switch. You might have to do so for inventory requirements or for confirmation or verification for support contract entitlement. This document explains how to read chassis and line card serial numbers through remote access to the MDS 9000 series switch.

The chassis serial number on a MDS 9000 series multilayer switch is used to identify the unit for service contract purposes. It can be read from the sticker on the back of the unit next to the power supply; or it can be read remotely by issuing the show sprom backplane 1 command. The serial number is found below the product number.

Serial numbers for line cards are printed on the bottom of the metal card tray. To remotely read the serial number, issue the show module command, which lists information about the installed modules, including the serial numbers.

You must furnish the consignee with a detailed technical description of each commodity to be given to the government for its use in issuing the FC Import Certificate. For example, for shotguns, provide the type, barrel length, overall length, number of shots, the manufacturer's name, the country of manufacture, and the serial number for each shotgun. For ammunition, provide the caliber, velocity and force, type of bullet, manufacturer's name and country of manufacture.

(B) Provide to U.S. Customs and Border Protection an invoice or other appropriate import-related documentation (or electronic equivalents) that includes a complete list and description of the firearms being temporarily imported, including their model, make, caliber, serial numbers, quantity, and U.S. dollar value; and

I have two tables one table is having only Serial numbers with removing duplicateAnother table serial numbers like 10 serial numbers in one column with other details like products suppliers resellers etc.

I have an excel spreadsheet that I'm attempt to do a vlookup or index to get detail of the monthly cost for cell phone to the first tab of a worksheet.I have a tab for the details of multiple cell phones by month. it includes base costs, total minutes, text message, GB used, and so on.I would like the front tab to pull the current month data from the detail sheet so the data can be reviewed monthly.So I have created a tab that has the phone number, then a drop down menu for the month, then I need it to pull the data for that cell for that month.

For the LTID phase, Reporting Agents should aggregate the number of accounts with associated LTIDs across all of its broker-dealers (CRDs) it is reporting for. The certification requirements will apply against the aggregate totals of CAIS-reportable accounts with the added requirement that at least one record from every broker-dealer (CRD) that is reportable is included in the certification.


Willkommen in der Gruppe! Hier können sich Mitglieder austau...
bottom of page